Supermicro MI300X GPU Service Specialist (SMI300XS) 認定 SMI300XS 試験問題:

1. You must remove the motherboard tray from the chassis before you can access the NVMe backplane.
True or False?

A) True
B) False

2. Before disconnecting the cables from the NVMe backplane, you should map or take a picture of the cables to ensure they are returned to the same locations. True or False?

A) True
B) False

3. Once you remove the midplane lid from the AS-8125GS-TNMR2 system, how many total screws must be removed from the sides of the chassis in order to remove the midplane bracket?

A) 6 screws total (3 on each side of the chassis)
B) 4 screws total (2 on each side of the chassis)
C) 2 screws total (1 on each side of the chassis)
D) 8 screws total (4 on each side of the chassis)

4. To disengage a PCIe, motherboard, or GPU tray on the AS-8125GS-TNMR2 system, loosen the screws on either side of the tray, then slowly pull the tray out to disengage it. True or False?

A) True
B) False

5. Once you have removed all 12 screws that secure the motherboard to the motherboard tray, what is the proper way to remove the motherboard?

A) Tilt the chassis to shake it out of the tray.
B) Make sure to touch the pins and shove the motherboard out of the tray.
C) Avoid touching the pins and carefully slide the motherboard slightly out of the rear of the tray, then place one hand underneath the rear of the tray and continue sliding the motherboard out of the tray without tilting it up or down.
D) Use one hand the entire time to remove the motherboard tray and hold the motherboard in the bottom center as if you're holding a pizza.

質問と回答：