F5 F5CAB2 試験概要:

F5 F5CAB2 認定試験の出題範囲：

参照：https://support.education.f5.com/hc/en-us/articles/35052643024027-BIG-IP-Administration-Data-Plane-Concepts-F5CAB2-exam

F5 BIG-IP Administration Data Plane Concepts (F5CAB2) 認定 F5CAB2 試験問題：

問題 #1
What type of Virtual Server is configured with no Pool-members, and proxies traffic to the destination IP address specified by the client device?

A. Forwarding (IP)
B. Standard
C. Stateless
D. Performance (Layer 4)

問題 #2
A network administrator is planning to add a trunk to a single BIG-IP system. What does a trunk provide? (Pick the 2 correct responses below)

A. A trunk adds use of VoIP traffic on the network connection.
B. A trunk adds link redundancy to the network connection.
C. A trunk adds more bandwidth to the network connection.
D. A trunk adds use of tagged VLANs on the network connection.

問題 #3
Which of the virtual servers listed is selected when a packet is sourced from 10.10.1.1:34456 and destined to 10.16.2.100:445 arrives at the BIG-IP?

A. ltm virtual forwarding {
destination 0.0.0.0:any
ip-forward
ip-protocol any
mask any
profiles {
fastL4 { }
}
serverssl-use-sni disabled
source 0.0.0.0/0
translate-address disabled
translate-port disabled
}
B. ltm virtual virtual_server {
destination 10.120.6.10:445
ip-protocol tcp
mask 255.255.255.255
pool test_pool
profiles {
tcp { }
}
serverssl-use-sni disabled
source 0.0.0.0/0
source-address-translation {
type automap
}
translate-address enabled
translate-port enabled
}
C. ltm virtual virtual_server {
destination 10.16.2.100:445
ip-protocol tcp
mask 255.255.255.255
pool test_pool
profiles {
tcp { }
}
serverssl-use-sni disabled
source 192.168.5.1/32
source-address-translation {
type automap
}
}
D. ltm virtual forwarding {
destination 10.16.2.100:any
ip-forward
ip-protocol tcp
mask any
profiles {
fastL4 { }
}
serverssl-use-sni disabled
source 0.0.0.0/0
translate-address disabled
translate-port disabled
}

問題 #4
The network architecture for a BIG-IP consists of an external VLAN and an internal VLAN with two interfaces connected to the upstream switch. The design requires fault tolerance in the case that one of the interfaces is down. Which deployment architecture meets these requirements? (Choose one answer)

A. Two network trunks each with one VLAN and LACP enabled, and both VLANs configured as tagged
B. Two network trunks each with one VLAN and LACP disabled, and one VLAN configured as tagged and one VLAN configured as untagged
C. One network trunk with both VLANs and LACP enabled, and both VLANs configured as untagged
D. One network trunk with both VLANs and LACP enabled, and both VLANs configured as tagged

問題 #5
A BIG-IP Administrator makes a configuration change to a Virtual Server on the Standby device of an HA pair. The HA pair is currently configured with Auto-Sync enabled. What effect will the change have on the HA pair configuration? (Choose one answer)

A. The change will take effect when Auto-Sync propagates the config to the HA pair.
B. The change will be undone next time a configuration change is made on the Active device.
C. The change will be propagated next time a configuration change is made on the Active device.
D. The change will be undone when Auto-Sync propagates the config to the Standby device.

解説：